How to use the high temperature mold temperature controller
High temperature mold temperature controller is generally divided into high temperature oil temperature controller and high temperature water temperature controller. Anyda high temperature mold temperature controller adopts advanced components, low energy consumption water pump/oil pump, long service life, low noise, small vibration, fast heating and cooling speed, The temperature is accurate and stable, the unique dual-power heating design is suitable for use in different temperature-controlled places, and it is fully rust-proof and anti-corrosion treatment, which is safe and long-lasting. It is your best choice. Then how to use the high temperature mold temperature machine? Come check it out with me.
Step 1: Check and set before the test machine, and check whether the oil, electricity, gas and pipeline of the mold temperature machine are normal.
Step 2, start the oil pump and check whether the steering of the oil pump and the rotation of the fan are correct, and then make sure that the fan and the oil pump can operate normally.
Step 3, refuel. The heat transfer oil is added to the oil tank of the expansion tank, and the heat transfer oil is input into each part of the oil carrier body through the heat transfer oil circulation, and then the mechanical operation is carried out.
The fourth step is to observe during the work, whether there is leakage of gas, whether there is leakage in the pipeline, and at the same time, we also need to determine whether the pressure is normal during the operation of the mold temperature machine.
